Gloss Chrome-Plated
With or without mixer
For extracting tap water
For public and semi-public areas
For installation in washbasins or work tops
For connecting hot, cold or mixed water
For use with stainless steel bowls
Not suitable for small continuous flow heaters
Automatic flush actuation
Infrared user detection
Self-adjusting IR sensor
Vandal-resistant
Volume flow control via tap aerator
Temperature pre-setting via mixer (only for models with mixer)
Not possible to set just hot water or just cold water (only for models with mixer)
Power supply via power supply unit
Economy mode can be set
Water saving due to quick-response two-beam scanning technology
Functions can be set and queried with the Geberit Service Handy
Water saver program can be set
Interval flush program can be set
Continuous flush can be set individually
Flush actuation can be deactivated via Geberit Clean Handy
Various functions can be set manually
With integrated check valve
Functional unit with built-in basket filters
Technical data
Nominal voltage 110–240 V AC
Mains frequency 50–60 Hz
Operating voltage 4.5 V DC
Power consumption 0.1 W
Cable length 1 m
Operating pressure 0.5–10 bar
Differentiated pressure CW/WW ≤ 1.5 bar
Ambient temperature 1–40 °C
Storage temperature -20 - +70 °C
Maximum operating temperature, water 60 °C
Maximum operating temperature, water, short-term 90 °C
Flow rate at 3 bar 5 l/min
Calculated flow rate 0.07 l/s
Minimum flow pressure for calculated flow rate 0.5 bar
Interval flush, adjustment range 1–168 h
Interval flush, factory setting 24 h
Interval flush time, adjustment range 5–200 s
Interval flush time, factory setting 5 s
Material Brass chrome-plated / plastic